Role of FTFSI Anion Asymmetry on Physical Properties of AFTFSI (A=Li,Na and K) Based Electrolytes and Consequences on Supercapacitor Application

This study compares the physicochemical properties of six electrolytes comprising of three salts: LiFTFSI, NaFTFSI and KFTFSI in two solvent mixtures, the binary (3EC/7EMC) and the ternary (EC/PC/3DMC). The transport properties (conductivity, viscosity) as a function of temperature and concentration were modeled using the extended Jones-Dole-Kaminsky equation, the Arrhenius model, and the Eyring theory of transition state for activated complexes. Results are discussed in terms of ionicity, solvation shell, and cross-interactions between electrolyte components. The application of the six formulated electrolytes in symmetrical activated carbon (AC)//AC supercapacitors (SCs) was characterized by cyclic voltammetry (CV), galvanostatic cycling with potential limitation (GCPL), electrochemical impedance spectroscopy (EIS) and accelerated aging. Results revealed that the geometrical flexibility of the FTFSI anion allows it to access and diffuse easily in AC whereas its counter ions (Li⁺, Na⁺ or K⁺) can remain trapped in porosity. However, this drawback was partially resolved by mixing LiFTFSI and KFTFSI salts in the electrolyte.     

In-situ preparation and electrochromic properties of TiO2/PTPA-HTAN core-shell nanocomposite film

A new star-shaped structure conjugated microporous polymers, poly (2,8,14-tri[4-diphenyl-benzene]-hexaazatrinaphthylene) (PTPA-HATN), was designed and in-situ electrochemically polymerized on the surfaces of FTO electrodes with a directional alignment TiO₂ nanorod array to obtain TiO₂/PTPA-HATN core-shell nanocomposite films. Compared with the PTPA-HATN film, the TiO₂/PTPA-HATN composite film exhibits higher optical contrast and faster response time, with contrast of 57% at 783 nm, coloring time of 3.62 s and discoloring time of 2.55 s (43%, 4.63 s and 4.77 s for PTPA-HATN film, respectively). After 400 cycles, the contrast of nanocomposite film decreased by 28%, while the PTPA-HATN film basically lost its electrochromic properties. A simple three-layer EC prototype device based on TiO₂/PTPA-HATN nanocomposite film constructed with hydrogel electrolyte clearly shows color changes at different voltages. On the one hand, the formation of core-shell porous nanostructure of TiO₂/PTPA-HATN composite film provides a larger ion doping/de-doping interface, shortening the average diffusion length of ions. On the other hand, the large indented polymer-nanorods contact interface makes it difficult for the polymer to detach from the electrode, thus significantly improving the cyclic stability of the composite film.     

Electrochemically Assisted Cycloaddition of Carbon Dioxide to Styrene Oxide on Copper/Carbon Hybrid Electrodes: Active Species and Reaction Mechanism

A novel electrochemically assisted cycloaddition process is proposed, in which highly efficient coupling of CO₂ with styrene oxide (SO) can be achieved to form styrene carbonate (SC) as a high-value-added product. A series of Cu catalysts with different morphologies and chemical states were fabricated on carbon paper (CP) by using in-situ electrodeposition, and the sample with nano-dendrimer structure was found to exhibit a relatively high activity of 74.8 % SC yield with 92.7 % SO conversion under gentle reaction conditions, thus showing its potential for practical applications. The relatively high electrochemically active surface area and charge transfer ability of dendrimer-like Cu benefited the electrochemical reaction. In particular, the Cu²⁺ species that were formed in situ during the reaction played a vital role in enhancing the activity and selectivity of the proposed Cu/CP hybrid catalyst. Cu²⁺ atoms served as active sites that can not only electrochemically activate CO₂ but also facilitate the ring opening of SO. Mechanistic analysis suggested that the reaction followed electrochemical and liquid-phase heterogeneous paths, which provide a new green and sustainable route for efficient utilization of CO₂ resources for fine chemical electrosynthesis.     

Construction and application of an electrochemical sensor based on graphene-MXene nanocomposites for baicalin detectionEI北大核心CSCD

Redox graphene-MXene(rGO-MXene) nanocomposites were prepared by ion polymerization and used to construct a highly sensitive electrochemical sensor for baicalin(BA) detection. The synergistic effect of rGO and MXene increased the specific surface area and electron transport capacity of the electrode, and significantly enhanced the electrochemical response of BA. The cyclic voltammetry and differential pulse voltammetry were used to investigate the electrochemical behavior of BA on the sensor. Under the optimal conditions, the peak current exhibited a good linear relationship with BA concentration in the range of 0. 05-10 μmol / L, and the limit of detection was as low as 28 nmol / L. The method was applied to analyze traditional Chinese medicine preparations containing baicalin, such as Qingkailing Capsule and Sanhuang Tablets with good accuracy and spiked recovery. The results were highly consistent with those of high performance liquid chromatography, providing a technical means for the rapid and sensitive detection of traditional Chinese medicine preparations. © 2022, Youke Publishing Co.,Ltd. All rights reserved.     

新型多孔材料用作色谱手性固定相

手性固定相是色谱法分离分析手性化合物的关键。近年来,随着材料科学的迅速发展,越来越多的新型手性材料被作为色谱固定相用于手性分离分析。本文综述了近5年来液相色谱、气相色谱和毛细管电色谱领域的新型手性固定相的研究进展,重点总结了基于手性多孔材料的新型手性固定相研究,最后对手性固定相的研究进行了总结与展望。     

Voltammetric and spectroscopic studies of water/formamide ratios in the production of the cerium (III) hexacyanoferrate (II) nanoparticles

The present study describes the simple and fast preparation of Cerium (III) hexacyanoferrate (II) (CeHCF) solid nanoparticles at three different water/formamide (%) ratios used as solvent (v/v) (100:0, 80:20, 0:100). CeHCF nanoparticles (Nps) were characterized by fourier transform infrared pectroscopy (FTIR), x-ray diffraction (XRD), scanning electron microscopy (SEM), zeta potential and cyclic voltammetry (CV). Electrodes modified with CeHCF presented a well-defined redox pair with formal potential (E^o′) of approximately 0.29 V (vs. Ag/AgCl(sat) attributed to the Fe^{2 +}/Fe³⁺ redox pair in the presence of cerium (III)). The Nps in the three systems investigates, presents a random size distribution to different surface, where most were distributed between 20 and 160 nm. Considering the three investigated systems, only CeHCF-1 (100:0) was sensitive to L-dopamine, presenting a linear signal region as a function of L-dopamine concentrations, with a limit of detection (LD) of 0.125 mmol L⁻¹, limit of quantification (LQ) of 0.419 mmol L⁻¹ and amperometric sensitivity (S) of 148.16 μA mmol L⁻¹.     

Silver/graphene–polypyrrole composite for levosimendan detection

This study used a facile method to develop a novel silver/Graphene–polypyrrole (Ag/G–PPy)-modified electrode that can be used as an electrochemical sensor for levosimendan detection. The properties of the synthesized Ag/G–PPy-modified electrode were examined through field-emission scanning electron microscopy, x-ray diffraction, and transmission electron microscopy. The Ag/G–PPy-modified electrode exhibited satisfactory current signals toward levosimendan concentrations ranging from 0.21 to 6.88 μM and exhibited a low detection limit (0.12 μM). Accordingly, the proposed electrode can serve as a simple and inexpensive electrochemical sensor for levosimendan detection.     

CoO纳米颗粒/石墨烯纳米纤维复合材料的制备及电化学性能

用石墨烯和Co(CH₃COO)₂·4H₂O作为原料,利用超声辅助法合成了锂离子电池的负极材料CoO纳米颗粒/中空石墨烯纳米纤维复合物.采用X射线衍射(XRD)确定材料的物相组成,采用扫描电子显微镜(SEM)和透射电子显微镜(TEM)观察材料的表面形貌和微观结构,采用X射线光电子能谱(XPS)确定材料的价态结构.采用循环伏安、恒电流充放电和交流阻抗谱表征材料的电化学性能.结果显示,在100 mA/g的电流密度下,循环了160次后,可逆容量仍超过800 mA/g,库仑效率保持在99%以上.该材料优异的电化学性能主要归因于石墨烯的中空纤维结构,中空内部可以容纳电解液,能直接将离子输送到颗粒表面,实现了离子的快速传输;二维中空纤维搭建成三维网络结构,实现了三维电子传导网络.     

Determination of macrolides in livestock excreta by syringe purification coupled with liquid chromatography tandem mass spectrometryEI北大核心CSCD

A method of syringe-dispersive solid-phase extraction combined with ultrahigh performance liquid chromatography with tandem mass spectrometry for the simultanous determination of 10 macrolides in manurebased fertilizers was developed. After extraction with methanol and acetonitrile,the extracts were purified by insyringe dispersion solid-phase extraction in syringes pre-filled with 60 mg PSA and 30 mg C18. The resulted extracts were further separated by a BEH C18 column,detected by multiple reaction monitoring in electrospray positive ion mode,and quantified by matrix-matched external standard method. The results showed that the recoveries of the target compounds ranged from 70% to 110% at three spiked levels（10,30,and 50 μµg/kg）with the relative standard deviations ranged from 1.4% to 12%. The limits of detection and quantification were 0.57 1.75 and 2.77-5.40 μµg/kg,respectively. This method was suitable for the simultaneous determination of residual macrolides in organic fertilizers. © 2023, Youke Publishing Co.,Ltd. All rights reserved.     

卤化物固态电解质研究进展

全固态电池因其高能量密度和高安全性而成为具有发展前景的下一代储能技术。开发具有高室温离子电导率、优异化学/电化学稳定性、良好正/负极兼容性的固态电解质是实现全固态电池实用化的关键。卤化物固态电解质因其优异的电化学窗口、高正极稳定性、可接受的室温锂离子电导率等优势,受到了广泛的关注。本文通过对近年来卤化物电解质的相关研究进行总结,综述了该类电解质的组成、结构、离子传导路径及制备方法,并分析了金属卤化物电解质的电导率、稳定性特点,归纳了近年来该电解质在全固态电池中具有代表性的应用,并基于以上总结和分析,指出了卤化物固态电解质的研究难点及发展方向。